Chlorine was originally discovered in Sweden in 1744 and has been used in the United States since the early 1900s. It is now the most effective method of disinfection and used for water treatment everywhere. Below is a detailed guide about this substance and how it is used.

The Purpose of Water Chlorination

Applied in the right way and in the correct doses, chlorine can make water safe for people to consume. This relatively inexpensive treatment inactivates the pathogens that are found in H₂0 by breaking the chemical bonds in its molecules. Greater amounts are applied to swimming pools since they are exposed to the open air, and subsequently, more germs. Also, people generally do not end up drinking much of the water. Without it, people would be more likely to get sick and even die from dysentery, cholera, and other waterborne diseases. 

What Is the Process Like?

Chlorination can be applied during any time of the water treatment process. If it’s implemented immediately after it enters a treatment facility, it’s added directly to the raw water or in the flash mixer. Chlorine removes algae and other kinds of aquatic life to prevent them from causing issues further down the line.

Chlorine can also be added in the final step. This will keep chlorine residuals in the water as it goes through the distribution process. This is more cost-effective because many of the unwanted organisms have already been removed in the previous steps and less chlorine is required to disinfect the water.

If you would like to learn more information about chlorinating water, turn to the professionals at Western Environmental Management. They have been in business for more than 30 years and are the premier water treatment company in Carlsbad, NM. These professionals provide many different cutting-edge products and technologies to use in your water management system, including demineralizers, water softeners, and reverse osmosis units. For questions, call (575) 885-5709 or visit their website for more on their water treatment services.