Share:

The pump in your water well constantly works to deliver water to the home, and most models will function smoothly for several years. Over time, the seals can crack and moving parts may wear out, preventing the device from transferring water to your plumbing system until you receive professional well pump repairs. Below are several problems you should recognize so that you can schedule prompt service.

What Issues Can a Well Pump Experience?

1. Faulty Pressure Switch

Often, improper water pressure in your plumbing system isn't directly related to the pump. Instead, inside the pressure tank is a switch designed to turn off the water if too much enters the system. This switch is normally located on top of the feed line from the pump into the house. If something hits this switch and rotates it so that it is parallel to the ground, it is turned off. Rotating this switch to be perpendicular to the floor should solve the issue.

2. Electrical Issues

If your house has no water and you don’t hear any sounds from the well, the pump may not be receiving power. This is usually caused by a power surge tripping a circuit, so check the breaker box first. Flipping the associated breaker may restore the water supply. If the problem keeps occurring, the wiring may be faulty, requiring well pump repairs.

3. Falling Water Table

well pump repair

Groundwater levels can drop during the summer and winter, causing the water table to fall below the pump. While conserving water can help reduce the impact during drought conditions, the well can still dry up or fall to an inaccessible level. In these cases, having a contractor lower the pump can help restore the supply.

4. Sputtering Water

When you turn on a faucet, the stream should be consistent. When the water comes intermittently or splits out of the faucet, air is entering the supply. This is usually due to broken seals inside the pump or a cracked pipe between the well and pressure tank. While a well pump repair professional can fix a damaged seal, you may need to replace the pipe if it is cracked.

5. Discolored Water

Cloudy water usually means that the water level is too shallow, as this allows the pump to pull sediment from the bottom. In this case, a well drilling contractor may need to dig deeper to reach the water table. This can also occur due to a clogged or malfunctioning filtration system. When this happens, sand and silt can pass through the filter and damage internal parts without prompt attention.

 

When you need well pump repairs to restore your home's water supply, contact Bulloch Well Drilling Inc. in Statesboro, GA. Since 1973, they have been providing comprehensive well repairs and maintenance. Whether you need to supply a home, business, or farm, they can drill the appropriate well for your needs. Visit the website to learn more about their services, and call (912) 764-2676 to schedule a consultation.

tracking