Powder coating helps your fencing endure rain, wind, UV rays, and other damaging elements throughout the year. You need to take care of this durable powder barrier to get the most from it, and there are essential guidelines to follow. Adopt the practices below to ensure your coating and fence continue to look great.

Do:

Clean regularly.

Clean your powder-coated fencing every 1-2 months, or as you notice buildup collecting. Removing mildew, soil, and debris will prevent staining and scratching. 

Carefully wipe away these substances with a soft cloth and mild soap. Avoid harsh chemical cleaners that may erode the coating, and never scrub with hard bristles that will scrape the coating away.

Apply wax.

Homeowners love powder coating because it adds a sheen to fencing. If your fence is losing its glimmer, apply some wax. 

Look for a non-abrasive product and hand-apply it with a microfiber cloth. Some products also include UV-reflective additives to prevent sun damage. Inspect your fence every few months and apply a thin layer of wax to dull areas to restore the coating.

Don’t:

Let scratches and dents sit for a long time.

Minor scratches may not seem like a big deal, but debris can accumulate around and in them. They may deepen, widen, and will also allow moisture in. This can be a serious problem if you’ve coated iron fencing, as it will begin to rust and become brittle. 

Rub the scratch with medium-grain sandpaper until it's smooth. If you’re dealing with dents, cracks, or large, broken sections, contact repair professionals right away before they worsen.

Paint without primer.

Powdering coating is electrostatically attached to your fence surface. If you try to paint over it, the paint won’t adhere because it’s doesn’t have an electrostatic charge. Instead, you’ll need to first apply a metal primer and then the paint. Epoxy-based paints are more adhesive than others and will stick to the coating better.

If you want to explore powder coating further, contact Gateway Powder Coating in O’Fallon, MO. This leading specialist works with materials ranging from aluminum and steel to copper and cast iron. They offer a wide variety of services, including welding and sandblasting, which you can learn about online. Call (636) 486-2428 to speak with a representative.